Alambrismo - Special for Children
Let's go, little friends, ask dad or mom to help you cut 6 wires to make a spider like the one you'll see next.
The materials to use:
- Cutting clamp
- Wire No. 20, can be copper or aluminum
- A metra or marble and a small ball or bill
- Ruler or tape measure
Step 1. Cut four wires N ° 20 of 25cm and two of 10 cm, to measure you can use the ruler or a tape measure.
Step 3. They should be as you see below.
Step 4. Open the wires well to wrap the meter or marble.
Step 5. You are accommodating the four wires to be able to tie them again more easily, the meter or marble will be well adjusted.
Step 6. Verify that everything is fine, select two wires to pass through the hole in the ball or account smaller.
Step 7. Now you take a wire at the same time of the two that you passed through the ball or count, and you are twisting it from the tip towards it.
Step 8. With the remaining wires you will form their long legs, first you separate and shape each of the remaining wires.
Step 9. Find a special place for your spider, you can decorate your room or give it to a friend, you will surely like it.
I appreciate that you take a bit of your time to follow the step by step of this guide, I hope you have been to your liking and that you can make all the spiders you want.
Step by step guide authorship of @erondon
This post has received a 3.16 % upvote from @boomerang.
Greetings to @boomerang, thank you very much for the support and great contribution to the community, they are very kind.
Congratulations! This post has been upvoted from the communal account, @minnowsupport, by erondon from the Minnow Support Project. It's a witness project run by aggroed, ausbitbank, teamsteem, theprophet0, someguy123, neoxian, followbtcnews, and netuoso. The goal is to help Steemit grow by supporting Minnows. Please find us at the Peace, Abundance, and Liberty Network (PALnet) Discord Channel. It's a completely public and open space to all members of the Steemit community who voluntarily choose to be there.
If you would like to delegate to the Minnow Support Project you can do so by clicking on the following links: 50SP, 100SP, 250SP, 500SP, 1000SP, 5000SP.
Be sure to leave at least 50SP undelegated on your account.
Congratulations @erondon! You have completed some achievement on Steemit and have been rewarded with new badge(s) :
Click on the badge to view your Board of Honor.
If you no longer want to receive notifications, reply to this comment with the word
STOP
We cannot upvote anything higher than 0.12 or 0.121 SBD. Please do not send more than that. You sent 0.360
Thank you very much @thundercurator for the information, as they are always very kind, I sent 0.36 for another post but thanks to the clarification I will not do it again.