You are viewing a single comment's thread from:
RE: Easy to Mine Cryptocurrency Series – Volume 1
It will be, I'm not putting this on other social sites only Steemit.
What is your hardware so I can check it before I publish the post?
I can run a machine with similar specs to see if it's worthwhile and if it isn't will include an alternate suggestion for similar spec's. This is mainly a concern with mid range to low range CPUs.
Most my suggestions something like a R5 230 or GT 710 would work be able to run it.
Anyone else who has limited set ups feel free to post what you have and I will do my best to cater to you in every post.
Thanks heaps for the offer mate, but I am not really sure my machine is even capable..it has a HD6670, a dual core intel @3Ghz, still running 32 bit windows 7. It really needs upgrading, just not in a position to do so at the moment. Good luck, and challenge set.
How many watts is your PSU?
That's a good question. It would still be standard, am guessing at 350, I'll slip the cover off later and confirm for you
Hey bud, if you're still doing this... its a 450w PSU. Manged to get her running on 64bit windows 10, and 'juiced' it up a little. Not much, as it became to unstable but an improvement on where it was none the less.
Yep, I am. I delayed announcing the first mineable coin to get out a post for BTCP. I will test a set up for you before releasing the post. I am aiming for publishing the post Thursday. The coin I am covering should run on that rig, 450 watts should be more than good for your set up.