Folding table tennis table

This table tennis table can be quickly folded away and removed, so as not to suffer from the rain.
The frame is made of its metal parts, the old water and gas pipes. Two frame sizes 1525h 1370mm - from the corners 30h30mm. They are connected between a door hinges, which are welded to the frames.
The legs are made of pipes with diameter of 30-40mm, they, too, are welded to the frames: the right - in the end, and to the left (the roof) - the side of the flattened ends of the pipe so that the table can be folded freely. For the stability of the legs are welded to the spacers.
Shields for desktop accurately cut by the frame of particle board (thickness 12-20mm).
Each panel is placed in the frame and fasten it with screws to the edges of the frame drilled holes. And to the size of sheets (thickness) match the frame dimensions, they bolted from below the corresponding strips of wood. Paint the table in the green.
On the roof are pieces of iron or duralumin, joined seam roofing. To roof does not sag and better water dripping from it, to the boards nailed strips of wood to the center they are slightly above (3-4 mm).
The table is ready. These tables for outdoor games, I think, can be done to pioneer camps, boarding houses. If you have any difficulty with welding work, you can make the entire structure on bolts.