The producer's Toolbox - Lesson 1: Guitar layering - example over a Pop/Rock production.

in #engrave6 years ago (edited)

(Disclaimer: This is a revision of one of my old articles already posted on the Steem blockchain with the intention of building my Engrave blog)

Hello Everyone !

I want to talk about a bit on guitar layering, as it is a very common thing when recording this intrument, where you hear a section with ''one big guitar'', there is a high chance it is actually composed of various tracks doing the same thing or very similar playing to build it up to the desired effect. Sometimes with more than one guitar or amp.

I recorded guitars for Stanley Parker's album, which I am sharing at the end of the post but I'm separating a little section where I layered quite a lot of guitars, 6 guitars, to get that effect of a big rock section, kind of a Foo fighters nod to it. So, here is the particular section before I recorded anything on top of it .

So , just drums , acoustics , some reference vocals and a very subtle keyboard layer . I was asked to bring in some more rock element to the whole song , so I added a lot of crunch electric guitars to give that desired effect.

This is the same section with my electric guitars added, they are very high in the mix in this example, a lot lower in the final product, Here it is :

See how the character changed? though the essence of the song is the same, this added that rock bite that we were looking for. There are 6 guitar tracks there, and I actually used 3 different guitars to add to the ''big dimension'' effect.

Ok... so.. how did I get there? Let's try and break this into steps :

1. Choosing the Gear
This is quite important, choosing the correct equipment is important, as they are ''sound tools'', choosing the correct guitar and amp will help us get closer to the desired effect. It might be a ''bad choice'' to use a BC Rich on a Randall for a jazz section or a vintage telecaster and a fender amp for a Metal section, you get the idea. Even if you have 1 guitar and one amp, choosing the correct EQ settings and plug-ins might help us get closer to what we need.

So... my gear?? Well, I do have some guitars (as I work with them ) for recording and/or playing live, meet the crew! :

25592116_10156026536745891_2424202183756164856_n.jpg

From left to right we have:

  • Epiphone AJ-220SCE - A very affordable acoustic but a true workhose, I've brought this guitar in to more sessions than anything else and it always makes it to the final take. Maybe I got lucky but I get very good results with this guitar so it's a keeper .

  • 72' Thinline Tele - Made in Mexico, changed the original neck for a strat one and it has stayed that way ever since, pickups and electronics are stock.

  • Tribe Detroit Custom - Quite an interesting guitar as it is made from steel. For me it is like an electric dobro. It is very bright sounding and I use it for anything I need to cut through in the mix.

  • Suhr Custom Classic S - Modern guitar, vintage strat tones, also the only guitar I have with the tremolo set-up.

  • Cordovez Strat Prototype - My main guitar for many years, built by my two brothers, it has it's own character and it's where I feel most comfortable.

For this particular track I used the two telecasters and the cordovez strat . Amp and signal chain-wise was very simple :

Guitar --> Maxon SD-9 --> Vox Ac 15 . For a microphone I used an old and trusty Shure Sm57.

2. Defining the Layers

It is important to define how many layers you are going to add, since it will affect dramatically on how you should approach the ''build-up''. In this particular part since I am using 6 tracks, it was definitely going to be a situation in where I had to play small chord voicings and alter them a little from track to track in order to create this big section without being a complete mess of notes and frequencies. It wouldn't make any sense to have 6 guitars doing the same thing with big open chords.

If we were doing a more ''organic'' session with less track layering I would have changed the approach completely. It is important to have that in mind as the results will be different.

Here I separated each guitar track so you can see how I did subtle variations on each part, inverting the chord, changing the guitar, playing in different sections on the guitar, etc.

Finally, I did two ''cascading'' examples with the guitars getting added one at a time . One going from guitar 1 to 6 and viceversa so you feel how they add up with each other.

*Go easy with the gain! don't over distort your tracks as the harmonic content will also add up and it will get messy.

3. Decide where the guitars will be placed

Also important, having 6 centered guitars doesn't make sense so it's important to sit them correctly in the mix. Even though I don't mix my tracks I do write extra indications on each track. For example, a guitar track might be named : '' Crunch rhythm telecaster 40%L '' giving some indications on where to pan it and such . When I layer several guitars I usually try to place them like around an imaginary fan, just personal taste.


Get the idea?

4. Don't get over attached!

Don't get too attached to your arrangement and/or layering since in the whole picture it might not work. I tend to record more than needed and then clean up the tracks, whatever that doesn't add anything gets erased . You don't want to have 40 guitar tracks in one song! ( unless they are REALLY needed ) as mixing engineers will hate you ! Always double check, edit and ''clean up'' your sessions.

Well, here is the final result, already mixed! Actually the whole layering thing became more of a subtle thing because it was mixed quite low as the acoustic is the main guitar , but it does add some extra ''punch'' to the whole picture!

Can you spot the section?

What do you think? Do you think it worked for the song? Can you spot all the guitar layers throughout the whole song?

I hope this lesson gives you some ideas for your own recordings and how you can add up tracks to achieve a desired effect in the song!

I'll be more than happy to answer any questions , let me know if you would like me to explain anything in better detail.

Thanks for reading!


Originally posted on Producer, Musician, Artist. . Steem blog powered by ENGRAVE.

Sort:  

Seems that Engrave doesn't support Soundcloud embedding , I will need to find a way around that. This is also a test , so please bear with me while I check these tools a bit more. I really like the Engrave project btw!

Hi @pechichemena, we will try to add Soundcloud support as soon as possible :) Thanks for using Engrave platform :)

And BTW, great post!

Thank you so much :D ! Hoping that happens soon , in the meantime I will try and check some more ''compatible'' posts to share :) ! Thanks for your comment!

Congratulations @pechichemena! You have completed the following achievement on the Steem blockchain and have been rewarded with new badge(s) :

You made more than 3000 comments. Your next target is to reach 3500 comments.

Click here to view your Board of Honor
If you no longer want to receive notifications, reply to this comment with the word STOP

To support your work, I also upvoted your post!

Support SteemitBoard's project! Vote for its witness and get one more award!