Assembling Our First Bee Boxes

20210424_184328 (1).jpg

Original Image

We just put together our first ever BEE BOXES!! We're going to be picking up a couple of nucs from Tender Hearts Honey Bees on May 15, so I'm kind of in crash course mode. I think I'm getting a handle on what I will need to do, but so far all I have is book (and YouTube) knowledge. I'm ready to get some hands-on experience, and that started with putting together our first bee boxes.

We will be starting with 2 hives. Each hive will start out with a deep box for the queen to start laying eggs in. This is generally referred to as a brood box. Later, as the hive grows, we will add a medium box for the worker bees to collect honey in.

The boxes came unassembled with each one consisting of four pieces. For a deep box, you will have two pieces that are 16" long by 19 5/8" tall and two pieces 19 7/8 inch long by 19 5/8" tall. The pieces on a medium box are same lengths as those of a deep box, but they will only be 6 5/8" tall. Each piece has joints that fit together nice and snug.

Joint Cut-Outs

Bee Boxes1.jpg
Original Image

It is super important to keep everything nice and square as you put your boxes together. Not only does the finished product need to be stackable, but bees are very particular about the spaces inside of their home. Any gaps outside of their very specific parameters (known as the bee space) will be filled with either comb or propolis. So, if your pieces aren't square, it will throw that spacing off and you may end up with your hives glued together.

Interlocking Pieces

Bee Boxes2.jpg
Original Image

As you put your pieces together, you will need to glue the joints and then hold them in places with screws or nails. The holes are already pre-drilled, but I went ahead and used a countersink bit on each hole. I wanted to use screws instead of nails, and I wanted them to end up being flush with the sides. I started out with just a couple of screws in each side so that I could still get a little bit of flex as I put the rest of the pieces on. Once all of the pieces were glued in and set all square, I put the rest of the screws in.

The finished products turned out pretty good, I think! I'm generally not very precise when I build things, so I was quite surprised that they all went together as well as they did. I'm sure if I can do it, so can you!

See Video Below For A More Detailed Explanation


Sort:  

Great stuff. It's such a good feeling when you get your first honey. I have a good friend who is a bit of an expert on bees, so feel free to ask if you have any questions.