Raspberry Pi Compute Module 3 Development Kit

The Raspberry Pi Compute Module 3 Development Kit takes all the great things of the Raspberry Pi SBC and makes it easy to engineer a production-level product.

The Raspberry Pi Compute Module 3 Development Kit consists of a main development kit IO board into which the Compute Module SODIMM board is connected. It also contains all of the necessary interface ports to allow an engineer to design and test their own prototype application. The modules simplify the design process engineers need to undertake when developing a System on Module (SoM) solution into their final product.

Engineers do not need to concern themselves with the complexities of interfacing with the BCM2837 processer directly and instead can concentrate on designing the interfaces to their own IO board and their application software . This simplicity fosters rapid development.

A Raspberry Pi Compute Module IO Board Camera Display Adapter is included in the kit to connect a standard Raspberry Pi camera board or Raspberry Pi display to the Compute Module IO Board. The IO board contains the following interfaces:

Multiple GPIO interfaces on 2 60 way 0.1” Headers
1 x Micro USB connector type B – USB Slave
1 x USB connector type A – USB Host
2 x CSI ports for camera boards
2 x DSI ports for display boards
Full size HDMI port
Micro USB power connector
Micro SD connector
SOFTWARE - ARMv7 Instruction Set, and a mature and stable Linux software stack