How to Make LAN Network Simulations Using Cisco Packet Tracer

Hello everyone, on this occasion we will share a tutorial on how to make LAN network simulations using Cisco Packet Tracer.


1.png


As knowledge Cisco Packet Tracer is a network platform simulator designed by Cisco Systems that serves to design a network simulation that will be done in the real world.

Before we continue to the tutorial, there are some needs you should prepare to do this tutorial first:

  • PC / your computer
  • Software Cisco Packet Tracer
  • Modules / guidebooks.

In this tutorial we use:

  • 1 Server
  • 1 Switch
  • 1 Access Point
  • 5 PC / Client
  • 5 Notebook / Client
  • RJ Cable-45 ( Straight )

After you have prepared some of the above, arrange as in the picture below:


2.png


The next step is to connect each PC / Client on Switch. Watch the picture.


3.png



4.png



After all PC / Client is connected to Switch. Next connect Notebook on Accespoint, but before connecting you must replace RJ-45 cable port on Notebook using WiFi device. Look at the picture.


5.png


The way double click on the Notebook, after there is a display like in the picture above, first you turn off the Notebook on the keys that we marked with the number 1, drag and replace with a device marked with number 3, and restart your Notebook. Do this on all Notebooks.

If you have replaced the RJ45 cable port with wireless , the notebook will connect to accespoint.

6.png

And connect accespoint to switch and switch to server, using straight cable.

7.png


If all devices are connected, the next step is the ip settings so that devices can connect to each other.
Double click on the server, choose Desktop , and select IP Configuration . Enter the ip address and subnet mask, let others, in this tutorial we use ip as in this picture.

8.png


The next step double click on PC1, select Desktop , select IP Configuration .

9.png

Then select DHCP , it will be filled automatically. Do it this way on all Client (PC / Notebook).

10.png


If all the above steps have been done correctly, then the last step is to check whether all Client is connected between Client one and other Client. How, Double on one Client, select Desktop , select Command Prompt .

11.png

Type "ping ip client the other" example "ping 192-168-1.10" . If the reply "Reply from ...." , then the simulation that you do successful, if "time out" , means you must check the simulation that you do.

12.png


Thank you for reading the tutorial from @devnanggroe , if there is a mistake we apologize because we are just students who are still in the learning phase. Hopefully useful for all readers!

TEAM SUPPORT:
@khalilmaulana @sametravel @ belajar.ngoding @dexpin
@fahrimunandar @andikasptra @syakirrahmatilla

BAHASA INDONESIA

Hallo para stemian semua, pada kesempatan kali ini kami akan berbagi tutorial tentang cara membuat simulasi jaringan LAN menggunakan Cisco Packet Tracer.


1.png


Sebagai pengetahuan Cisco Packet Tracer adalah simulator jaringan platform yang dirancang oleh Cisco Systems yang berfungsi untuk merancang sebuah simulasi jaringan yang akan dikerjakan didunia nyata.


Sebelum kita lanjutkan ke tutorianya, ada beberapa kebutuhan yang harus anda siapkan untuk melakukan tutorial ini terlebih dahulu :
  • PC/komputermu
  • Software Cisco Packet Tracer
  • Modul / buku panduan.

Pada tutorial ini kita memakai :

  • 1 Server
  • 1 Switch
  • 1 Acces Point
  • 5 PC / Client
  • 5 Notebook / Client
  • Kabel RJ-45 ( Straight )

Setelah anda menyiapkan beberapa keperluan di atas, susunlah seperti pada gambar dibawah ini :


2.png


Langkah selanjutnya adalah menghubungkan setiap PC / Client pada Switch. Perhatikan gambar.


3.png



4.png



Setelah semua PC / Client terhubung pada Switch. Selanjutnya hubungkan Notebook pada Accesponit, tetapi sebelum menghubungkannya anda harus mengganti port kabel RJ-45 pada Notebook menggunakan perangkat WiFi. Lihatlah gambar.


5.png


Caranya klik 2x pada Notebook, setelah ada tampilan seperti pada gambar diatas, terlebih dahulu anda matikan Notebook pada tombol yang saya tandai dengan nomor 1, tarik dan ganti dengan perangkat yang ditandai dengan nomor 3, dan hidupkan kembali Notebook anda. Lakukan cara ini pada semua Notebook.


Jika anda sudah mengganti port kabel RJ45 dengan wireless, notebook akan terhubung ke accespoint.

6.png

Dan hubungkan accespoint ke switch dan switch ke server, menggunakan kabel straight.

7.png


Jika semua perangkat sudah terhubung, langkah selanjutnya adalah setting ip agar perangkat bisa terkoneksi satu sama lainnya.
Klik 2x pada server, pilih Desktop, dan pilih IP Configuration. Masukkan ip address dan subnet mask, yang lain biarkan saja, pada tutorial ini kita menggunakan ip seperti pada gambar ini.

8.png


Langkah selanjutnya klik 2x pada PC1, pilih Desktop, pilih IP Configuration.

9.png

Lalu pilih DHCP, maka akan terisi dengan otomatis. Lakukan cara ini pada semua Client (PC/Notebook).

10.png


Jika semua langkah diatas telah dilakukan dengan benar, maka langkah terakhir yaitu mengecek apakah semua Client terhubung antara Client satu dan Client lainnya. Caranya, klik2x pada salah satu Client, pilih Desktop, pilih Command Prompt.

11.png

Ketik “ping ip client yang lainnya” contoh ”ping 192-168-1.10”. Jika balasannya ”Reply from ....”, maka simulasi yang anda kerjakan berhasil, jika ”time out”, berarti anda harus mengecek ulang imulasi yang anda kerjakan.

12.png


Terimakasih telah membaca tutorial dari @devnanggroe, jika terdapat kesalahan kami meminta maaf karena kami hanyalah sekelompok mahasiswa yang masih dalam tahap belajar. Semoga bermanfaat bagi pembaca semuanya !

TEAM SUPPORT :
@khalilmaulana @sametravel @belajar.ngoding @dexpin
@fahrimunandar @andikasptra @syakirrahmatilla

VID-20180317-WA0028.gif

Sort:  

keren ni tutorialnya, saya suka, ayo dilanjutin dengan tingkat lanjut, router dan switch sekaligus pengkodeannya.

Terimakasih @raghib terus dukung kami untuk menyediakan kontent yang lebih baik.

Kami telah upvote yaa..

Hoi devnanggroe, awesome explained thanks for the useful guide!

Congratulations @devnanggroe! You have completed some achievement on Steemit and have been rewarded with new badge(s) :

Award for the number of upvotes

Click on the badge to view your Board of Honor.
If you no longer want to receive notifications, reply to this comment with the word STOP

Do not miss the last post from @steemitboard!


Participate in the SteemitBoard World Cup Contest!
Collect World Cup badges and win free SBD
Support the Gold Sponsors of the contest: @good-karma and @lukestokes


Do you like SteemitBoard's project? Then Vote for its witness and get one more award!

Congratulations @devnanggroe! You have completed the following achievement on Steemit and have been rewarded with new badge(s) :

Award for the number of upvotes

Click on the badge to view your Board of Honor.
If you no longer want to receive notifications, reply to this comment with the word STOP

Do not miss the last post from @steemitboard:
SteemitBoard World Cup Contest - Play-off for third result


Participate in the SteemitBoard World Cup Contest!
Collect World Cup badges and win free SBD
Support the Gold Sponsors of the contest: @good-karma and @lukestokes


Do you like SteemitBoard's project? Then Vote for its witness and get one more award!

Congratulations @devnanggroe! You have completed the following achievement on Steemit and have been rewarded with new badge(s) :

Award for the number of upvotes

Click on the badge to view your Board of Honor.
If you no longer want to receive notifications, reply to this comment with the word STOP

Do you like SteemitBoard's project? Then Vote for its witness and get one more award!

Congratulations @devnanggroe! You have completed the following achievement on the Steem blockchain and have been rewarded with new badge(s) :

Award for the number of upvotes

Click on the badge to view your Board of Honor.
If you no longer want to receive notifications, reply to this comment with the word STOP

Do not miss the last post from @steemitboard:

SteemFest³ - SteemitBoard support the Travel Reimbursement Fund.

Support SteemitBoard's project! Vote for its witness and get one more award!

Congratulations @devnanggroe! You have completed the following achievement on the Steem blockchain and have been rewarded with new badge(s) :

You made more than 900 upvotes. Your next target is to reach 1000 upvotes.

Click here to view your Board of Honor
If you no longer want to receive notifications, reply to this comment with the word STOP

Do not miss the last post from @steemitboard:

The Meet the Steemians Contest is over - Results are coming soon ...

Support SteemitBoard's project! Vote for its witness and get one more award!

Congratulations @devnanggroe! You have completed the following achievement on the Steem blockchain and have been rewarded with new badge(s) :

You made more than 1000 upvotes. Your next target is to reach 1250 upvotes.

Click here to view your Board of Honor
If you no longer want to receive notifications, reply to this comment with the word STOP

Support SteemitBoard's project! Vote for its witness and get one more award!

Congratulations @devnanggroe! You received a personal award!

Happy Birthday! - You are on the Steem blockchain for 1 year!

Click here to view your Board

Support SteemitBoard's project! Vote for its witness and get one more award!

Congratulations @devnanggroe! You received a personal award!

Happy Birthday! - You are on the Steem blockchain for 2 years!

You can view your badges on your Steem Board and compare to others on the Steem Ranking

Vote for @Steemitboard as a witness to get one more award and increased upvotes!