How to make your pen drive bootable
Make your pen drive bootable and then you can use to install windows and software on bootable hardware devices
Steps to make pendrive bootable
Steps To Make Bootable Pendrive
Step 1: Insert your pendrive in USB Port
Step 2: Navigate to Start>>Run[OR press Ctrl+R] and type cmd and press Enter to open Command Prompt.
|Windows Vista and Windows 7 users will have to navigate to Start>>All Programs>>Accessories>>Right-click on Command Prompt and select Run as Administrator|
Step 3: In Command Prompt type DISKPART
Step 4: The next step is to type LIST DISK and press Enter
Step 5: Observe carefully, you will see Disk 0 normally this is your Hard Disk
Find your USB Device number, In my case Disk 1 is my USB pen drive
Please note that Disk 1 may not pen drive in your case, so be careful with this step
Step 6: Now type SELECT Disk 1 and press Enter
Step 7: Now type CLEAN and press Enter, this will erase data from Disk 1(in my case) i.e. your Pen Drive.
Step 8: Type Create Partition Primary and press Enter
Step 9: Type Select Partition 1 and press Enter
Step 10: Type Active and press Enter
Step 11: Type Format fs=ntfs quick and press Enter, this will format your USB Pen Drive.
Step 12: Type Assign and press Enter
Step 13: Now, finally type Exit and press Enter
Step 14:Now copy the windows files to your pendrive. That's done!!!
Now bootable pendrive with windows operating system is ready to install
Posted on Utopian.io - Rewarding Open Source Contributors
Hi! I am a robot. I just upvoted you! I found similar content that readers might be interested in:
https://www.facebook.com/hacking.geeks57/
Are you going mad ?
video i uploaded in this article already uploaded on my channel before 4 month ago check it
and content on my blog posted on feb 2017
http://ravik2492.blogspot.in/2017/02/how-to-make-pandrive-bootable.html
Your contribution cannot be approved because it does not follow the Utopian Rules.
We only need original contents
You can contact us on Discord.
[utopian-moderator]