You are viewing a single comment's thread from:

RE: Dawn to Sunrise - 6 August 2018 (Original Video/Photos)

in #photography • 6 years ago (edited)

Thank you for replying, really glad you had a chance to not take my harsh advice badly ... the fact i did do this comment late, on a bad day even!

I think I might have spotted it now tho, what you can do different really simple.

Before I reveal, you can try to shoot up to 400 ISO which will leave some grain, but it can be part of the image and not too much 'digital' noise. You can try 100 then 200 then 400 and do that in combination with the next technique, which is ...

Metering Modes. Leave that autofocus on, set for spot/touch focus and exposure. Try one shot with the focus on the brightest part of the image. This is where you are previewing shot on LCD, and touch any part of the image to focus and expose there. Then try all sorts of shots by picking different areas. Focus+expose for the grey clouds, the sunlight rays and colour should burst ... . This will give completely different images and dramatic results.

Further observation: shots in post are all F20. This explains the dulcit, pastel tones. Lower is always better / sharper at lower F stop. Lower the stop = more light into the lens and more data for the sensor to work with.

I'm no pro either.... I know nothing, really ... this is from my memory trial and error!

6 years ago in #photography by
$0.06
  • Past Payouts $0.06
  • - Author $0.04
  • - Curators $0.01
3 votes
Reply 4
Sort:  
  • Trending
    • [-]
     6 years ago 

    Getting carried away now ... last tip ... ditch the filters from that kit lens, unless shooting into blue sky bright light or water ...

    $0.03
    • Past Payouts $0.03
    • - Author $0.02
    • - Curators $0.00
    2 votes
    Reply
    [-]
     6 years ago 

    Again, thank you for the tips. Looks like I have some more experimenting and manual reading to do.

    I used an f-stop of 20 (and higher) to improve the depth of field. There are trees in the photo that are much closer than the far horizon. My limited experience in optics for photography has proven that the higher f-stops improves the sharpness of the images. I compensate with the exposure time (up to 30 seconds).

    This morning I was also experimenting with the different metering. I haven't downloaded those pictures yet, but they looked great on the camera's screen.

    As for the filters, the circular polarizing filter always enriches my colors and aid in getting good shot of the sun as it rises just above the horizon. The clear filter is mainly for protecting the polarizing filter and the camera lens. It has saved my lens on more than one occasion. The window I have my camera setup in to take bird photos has been broken by golf balls.

    I have several sunrises in the can to process and post. I will read up on the selecting the focus points today.

    Thanks again for you tips and advice.

    Have a great day!
    Steem on,
    Mike

    $1.22
    • Past Payouts $1.22
    • - Author $0.92
    • - Curators $0.30
    4 votes
    Reply
    [-]
     6 years ago (edited)

    I used an f-stop of 20 (and higher) to improve the depth of field.
    It won't make any difference to anything beyond infinity range of lens. Dopf will have an importance from < 6-20 ft away only. For sunrise you should set to infinity and go from there with the exposure/metering points. Sharpness will be very good at f8 and you'll need a shorter exposure than f20 = less noise
    filters - fair enough! I would say, priority is saving up for non-kit lens. 7D is really nice, better lens, no need to spend too much - Tamron or Sigma are good budget brand - will whip your results even higher. If you can't afford that, pretty much you could sell/swap kit around for lesser Canon body and better lens.

    $0.05
    • Past Payouts $0.05
    • - Author $0.04
    • - Curators $0.01
    3 votes
    Reply
    [-]
     6 years ago 

    Thank you so much for using our service! Congratulations! This round earned an ROI of 26.23% with total bids of: 0.699$

    You just received 92.72% upvote from @onlyprofitbot courtesy of @etcmike!

    Want to earn more with us? Our APR can reach as high as
    15% or more!

    More portion of profit will be given to delegators, as the SP pool grows!

    Comment below or any post with "@opb !delegate [DelegationAmount]" to find out about current APR, estimated daily earnings in SBD/STEEM

    You can now also make bids by commenting "@opb !vote post [BidAmount] [SBD|STEEM]" on any post without the hassle of pasting url to memo!

    * Please note you do not have to key in [] for the command to work, APR can be affected by STEEM prices